Hamlet woodturning tools

Multi Handle Range

The Hamlet Multi Handle System is without doubt the best all around system that there is today. With the ability to turn small and deep small hollow forms of all shapes and sizes. It converts easily with adaptors to bowls gauge turning and takes a variety of shear scrapers for finishing.

This is a must for every amateur and serious turner alike. Used and recommended by many professional wood turners worldwide.


THE FULL RANGE OF OUR TOOLS CAN NOW BE MADE TO FIT THE MULTI-HANDLE SYSTEM .

These are short and long handles into which you can fit Spindle Gouge and Bowl Gouge blades and a variety of other blades.

HCT600S - Multi Blade Handle 17" (430mm) long with 5/8 (16mm) diameter hole as standard fitting. Comes with 3 collets for Spindle Gouge:-

* 1/4 (6mm)
* 3/8 (10mm)
* 1/2 (12mm)

HCT600M - Multi Blade Handle 26" (660mm) long with 5/8 (16mm) diameter hole as standard fitting. Comes with 2 collets for Bowl Gouge:-

* 3/8 (10mm)
* 1/2 (12mm)

HCT600L - Multi Blade Handle 31" long (Goliath) 5/8 collet.

HCT 613 - Side Handle


Detail gouges for very fine point work between spindles.
boxes with ornamentation made using the Hamlet chatter tool
woodturning hook tools
woodcarving tools